SDI (Signaling Device Driver Interface)
27001
An error occurred which should not happen
27003
SDI message queue has disappeared
27004
System reached the maximum number of processes or is out of memory
27006
SDI failed to configure device
27007
SDI received message with incorrect format
27010
Pack enablement failed
27011
SDI: ODM error
27012
SDI failed to quiesce a trunk or channel
27013
SDI failed to configure a channel group
27014
SDI received alarm from device driver
27015
SDI ioctl failed
27016
Diagnostics failed
27017
Diagnostics failed
27019
SDI failed to open pack
27020
SDI failed to access system parameters
27021
SDI failed to make signalling library call
27022
SDI cannot load system parameters
27025
SDI could not notify CHPM
27026
SDI failed to unconfigure device
27032
SDI found invalid telephony parameter
27033
SDI re-enable notification
27035
SDI message queue problem
27036
Bad parameter on signalling library request sent from SDI
27037
Invalid common channel signalling trunk configuration
27038
SDI received invalid request
27039
SDI received request that cannot be accepted because SDI is busy
27040
SDI received unsupported request
27041
SDI received unreasonable request
27042
SDI was asked to log this request
27043
Signalling process reconfiguration problem
27044
Signalling library message: sequence number not expected
27046
SDI failed to enable pack because signalling process was missing
27047
SDI: pack type changed while
Blueworx Voice Response
was running
27048
SDI timed out on pack diagnostics
27049
SDI timed out on resetting voice recognition statistics
27050
SDI timed out on trunk reconfigure request to signalling process
27051
SDI timed out while disabling a pack
27052
SDI timed out while enabling a channel
27053
SDI timed out while disabling a channel
27054
SDI timed out while disabling a channel
27055
SDI detected signalling process termination
27056
SDI timed out on trunk enable request to signalling process
27057
SDI timed out on trunk disable request to signalling process
27058
SDI enable trunk failed by signalling process
27059
SDI disable trunk failed by signalling process
27060
SDI quiesce trunk failed by signalling process
27061
Enable trunk failed setting pack use
27062
SDI failed to initialize with signalling library
27063
Unexpected signalling library primitive received
27064
Unexpected signalling library alarm received
27065
Trunk disable requested by signalling process
27066
SDI enable channel failed by signalling process
27067
SDI disable channel failed by signalling process
27068
SDI quiesce channel failed by signalling process
27069
SDI detected non-essential signalling process termination
27070
SDI detected missing non-essential signalling process during enable
27071
SDI failed accessing error channel
27072
SDI re-enable notification (adapter)
27073
SDI re-enable failed (adapter)
27074
Telephony adapter loading exceeded warning threshold
27075
Telephony adapter loading has now reduced below warning threshold
27076
SDI thread error
27077
SDI ioctl failed
27078
Telephony adapter interrupts have drifted together
27079
Telephony adapter interrupts are now adequately separated
27080
Pack has failed too many times. Re-enable cancelled.
27081
Telephony adapter has failed too many times. Re-enable cancelled.
27082
Pack has now recovered
27083
Adapter has now recovered
27084
Trunk Enable Failed due to missing TDM Management
Parent topic:
Blueworx Voice Response messages identified by number