You can access all system parameters if you use the System Configuration option on the Configuration menu in either the Welcome window or the ASCII Console. Alternatively you can use the wvrsysconf command to directly manipulate the system parameters. Both of these methods are described in Modifying the VoIP environment (System Configuration).
You can more easily set parameters that control VoIP operations if you use the Pack Configuration option on the Configuration menu in the Welcome Window. The wvrteleconf command can be used as an alternative interface. Pack configuration is discussed in more detail in Modifying the VoIP environment using Pack Configuration or wvrteleconf.
To change the value of a system parameter, you must be logged on to Blueworx Voice Response, using an administrator profile with permission to Change System Configuration or Change Pack Configuration. This gives you access to those parameters listed in System parameters reference as having “Admin” access. To browse or change parameters listed as having “Field” access, you must have the password to the field administrator profile.Your Blueworx Representative might provide this password in some conditions. Normally, these parameters do not need to be changed.
Anybody who is logged on to Blueworx Voice Response can browse the values of system parameters listed as having “Admin” access.