VoIP SIP Signaling parameter group

Purpose

The parameters in this group define values for use by the SIP signaling process.

Scope

These parameters must be defined once if you are using SIP signaling.

The parameters defined here are used for all SIP channels.

To make new parameter values effective, disable and enable all DTEA packs

Parameters

• Accept Inbound Transfer Requests (Accept Inbound Transfer Requests)
• Add Host Name To User Agents? (Add Host Name To User Agents?)
• Call Signaling Port (Call Signaling Port)
• CHP available call reject threshold (CHP available call reject threshold)
• Default CLID for Incoming VoIP Calls (Default CLID for Incoming VoIP calls)
• Default Destination Port (Default Destination Port)
• Default Destination URI (Default Destination URI)
• DNSSRV Server Address (DNSSRV Server Address)
• DNSSRV Server Port (DNSSRV Server Port)
• E164 Prefixes to Strip (E164 Prefixes to Strip)
• Ignore replaces option for Attended Transfer (Ignore replaces option for Attended Transfer
• Inbound Call Channel Allocation Method (Inbound Call Channel Allocation Method)
• Message Header Format (Message Header Format)
• Organization Name (Organization Name)
• Outbound SIP INFO (Outbound SIP INFO)
• Override SIP Transport IP Address (Override SIP Transport IP Address)
• Proxy Address (Proxy Address)
• Proxy Mode (Proxy Mode)
• Proxy Port (Proxy Port)
• Register Addresses on Startup (Register Addresses on Startup)
• Register Default Timeout (Minutes) (Register Default Timeout (Minutes))
• Register Default User Agent (Register Default User Agent)
• RFC3264 Media on-hold method (RFC3264 Media on-hold method)
• Secure SIP Enabled (Secure SIP Enabled)
• Session Timer Allow Update For Refresh (Session Timer Allow Update For Refresh)
• Session Timer Enable (Session Timer Enable)
• Session Timer Inbound Refresher Default (Session Timer Inbound Refresher Default)
• Session Timer Maximum Session Time (Session Timer Maximum Session Time)
• Session Timer Minimum Session Time (Session Timer Minimum Session Time)
• Session Timer Outbound Calls Refresher Default (Session Timer Outbound Calls Refresher Default)
• T.38 Fax Refer URI (T.38 Fax Refer URI)
• Transport Protocol (Transport Protocol)
• Use allowed host list (Use allowed host list)
• Use SIP REQHDR for Application Profile Selection (Use SIP REQHDR for Application Profile Selection)