Enabling secure SIP

The process to follow for enabling secure SIP in the Blueworx Voice Response System Configuration is described.

After you configure your certificates in keyring.db, you can enable secure SIP in the Blueworx Voice Response System Configuration by completing the following steps:

From the Welcome window, select Configuration → System Configuration → Change.
The System Configuration window opens.
Click on the VoIP SIP Signaling button.
The VoIP SIP Signaling window opens.
Select Secure SIP Enabled, and change the value to True.

You then need to restart Blueworx Voice Response for these changes to take effect.

Any future changes to this setting or to keyring.db will also require restarting Blueworx Voice Response. Setting the Secure SIP Enabled parameter alone does not allow Blueworx Voice Response to make secure SIP calls. You must have previously set up the keyring.db certificate database. When enabled, Blueworx Voice Response can accept secure inbound calls and can make secure outbound calls.