ssimkclient command

Purpose

Configures a Blueworx Voice Response system as a client node in a single system image.

Description

When you run the ssimkclient command on a Blueworx Voice Response system, it configures that system as a client node. Before you use this command:

• The system on which you want to run the ssimkclient command must not be configured as a server node; if it is, the command fails.
• The server to which you want the client to connect must already be configured as a server node. To do this, use the ssimksvr command (see ssimksvr command).

When you run the ssimkclient command, it prompts you to type the password of the Blueworx Voice Response user on the server. This ensures that a connection can be made to that server. Normally this login ID is dtuser.

Flags

server_hostname

The host name of the network interface that you want to use for DB2 data on the Blueworx Voice Response system that is configured as the database server node in the single system image.

You must specify a fully-qualified domain name (for example, john.mydomain.com).

server_port

The TCP/IP port address (on the server) that you want to use to carry DB2 requests from the client to the server.

If you do not specify an address, Blueworx Voice Response uses the default value 50110.

If you do not want to specify a particular address, let Blueworx Voice Response use its default address. The only requirement is that no other software running on the system can use the same address.

Exit status

0

Successful completion.

>0

An error occurred. Messages show the reason for the error.