IBM_Trombone_Custom_Server has a number of command-line parameters that you can set to help debug problems, or to fine tune the operation of the custom server. These are defined here.
The command-line parameters are defined in Table 1.
| Parameter |
Default |
Description |
|---|---|---|
| -d |
off |
Provide extra debugging information (over and above the normal information that always gets sent). |
| -s |
off |
Print debugging information to stdout as well as to AIX system trace. |
| -a |
off |
Send extra Information alarms to the error log. |
| -pn |
n=0.1 |
Number of child helper processes to run. See About child helper processes for information about setting this parameter. |
| -en |
0 |
The event data (n) sent by the custom server if the third party hangs up (see the Blueworx Voice Response for AIX: Custom Servers information: CA_Report_Channel_Event()). |
| -in |
0 |
The information field (n) sent by the custom server if the third party hangs up (see the Blueworx Voice Response for AIX: Custom Servers information: CA_Report_Channel_Event()). |
| -z |
off |
This parameter is for test purposes only. It causes the custom server to enrol one of each type of error possible on custom server start-up, then terminates. The enrolment of errors takes about 30 seconds. |