Channel Group
Admin
ACL
ISDN - 5ESS - 5E8
ISDN - 5ESS - 5E9
ISDN - TR41449
ISDN - DMS100 - BCS34
ISDN - Euro-ISDN
ISDN - E1 QSIG
ISDN DMS 100 National 2
ISDN T1 National 2
ISDN Japanese INS
None
SMSI/SMDI/VMS
User1 through User19
None
Specifies the signaling process type to be used for an exchange data link or for common channel signaling.
Select ISDN - 5ESS - 5E8 or ISDN - 5ESS - 5E9 (depending on the level of software you have on the switch), when the Call Information Type parameter is set to Signaling Process and you are using the AT&T/Lucent 5ESS ISDN protocol.
Select ISDN - TR41449, when the Call Information Type parameter is set to Signaling Process and you are using the AT&T/Lucent Definity ISDN TR41449 or TR41459 protocol.
Select ISDN - DMS100 - BCS34 when the Call Information Type parameter is set to Signaling Process and you are using the Northern Telecom DMS100 ISDN protocol.
Select ISDN - Euro-ISDN when the Call Information Type parameter is set to Signaling Process and you are using the Euro-ISDN protocol.
Select ISDN - E1 QSIG when the Call Information Type parameter is set to Signaling Process and you are using the QSIG protocol.
ISDN DMS 100 National 2 is a valid value, but it is not yet supported.
Select ISDN T1 National 2 when the Call Information Type parameter is set to Signaling Process and you are using the ISDN National 2 protocol on the Summa Four switch, or the 5E12 protocol on the Lucent 5ESS-2000 switch.
Select ISDN - Japanese INS when the Call Information Type parameter is set to Signaling Process and you are using the INS Net Service 1500 protocol.
Select SMSI/SMDI/VMS or ACL when the Call Information Type parameter is set to Signaling Process and you are using the exchange data link (EDL). You must also select the appropriate EDL Switch Type (in the Exchange Data Link parameter group).
Select User1 through User19 only if you provide your own signaling process type (see Blueworx Voice Response for AIX: Programming for the Signaling Interface).