SDI Timeout - Channel Outservice

Parameter group


Access level


Possible values

0 through 3600 seconds


60 seconds


Specifies the maximum time in which a signaling process must respond to an SL_CHANNEL_DISABLE_REQ primitive by sending an SL_CHANNEL_DISABLE_CNF primitive. After this time, Blueworx Voice Response disables the channel without waiting any longer. This time-out value differs from the SDI Timeout - Channel Disable, because it applies only if a trunk is disabled when the channels are in use.

Do not change this value unless you understand exactly what you are doing. Otherwise you might badly affect the operation of the system. If you have problems, return to the default value.