Trunk Interface
Field
Disabled
Enabled
Enabled
Specifies whether the telephony pack is to be automatically re-enabled after an irrecoverable error. Normally, you should leave this parameter set to Enabled to ensure maximum availability of trunks on a production system. However, to help with some types of problem diagnosis, IBM Service might ask you to set this parameter to Disabled. When the parameter is set to Disabled, you must stop, then restart Blueworx Voice Response to regain the use of the adapter after a hardware failure.
The maximum number of times the trunk is re-enabled in one hour is specified by the Maximum Retries for Pack/DTTA Reenabling parameter.