Exchange data link parameter group

Purpose

The parameters in this group define the exchange data link (if used). The exchange data link carries SMSI, SMDI, VMS, ACL, or other out-of-band information. To implement the exchange data link, you must also set the Message Info Line Identifier parameter in the Channel parameters group for each channel.

Scope

These parameters must be defined once, if you are using an exchange data link.

To make new parameter values effective, restart Blueworx Voice Response.

Parameters

• Called Number Character to Strip (Called Number Character to Strip)
• Called Number Length (Called Number Length)
• Called Number Length (Minimum) (Called Number Length (Minimum))
• Called Number Stripping (Called Number Stripping)
• Calling Number Character to Strip (Calling Number Character to Strip)
• Calling Number Length (Calling Number Length)
• Calling Number Length (Minimum) (Calling Number Length (Minimum))
• Calling Number Stripping (Calling Number Stripping)
• EDL Communication Port (EDL Communication Port)
• EDL Data Rate (bits/sec) (EDL Data Rate (bits/sec))
• EDL Parity (EDL Parity)
• EDL Switch Type (EDL Switch Type)
• Interval for Checking MWI Status (s) (Interval for Checking MWI Status (s))
• Line Identifier Number Length (Line Identifier Number Length)
• MWI Automatically Set (MWI Automatically Set)
• MWI Number Length (MWI Number Length)
• MWI Number Padding (MWI Number Padding)
• MWI Number Padding Character (MWI Number Padding Character)
• Number of Nak Retries (Number of Nak Retries)
• System Number (System Number)