Setting the SIP transport IP address

You only need to follow the instructions in this section if you have multiple network adapters and you need to force the signaling stack to use a particular Ethernet card IP address.

1. From the Welcome window, select Configuration → System Configuration → Change.

   The System Configuration window opens.

2. Click on the VoIP SIP Signaling button.

   The VoIP SIP Signaling window opens:

   Figure 1. VoIP SIP Signaling window
   

   

   
   
3. Click on the Override SIP Transport IP Address button.

   The VoIP SIP Signaling/Override SIP Transport IP Address window opens:

   Figure 2. VoIP SIP Signaling/Override SIP Transport IP Address window
   

   

   
   
4. Enter the IP address of your pSeries computer Ethernet card.
5. Click OK.

   Your configuration changes will take effect if you disable all VoIP trunks and re-enable them, or when you shut down and restart Blueworx Voice Response.