17983

Errors found testing SCBus connection to telephony adapter

Clocking or data transfer problems have been detected by the SCBus test during system initialization. Possible causes of the problem are: - There is no SCBus/H.100 cable connecting the adapters - There is a cable and it is faulty

Plug an SCBus/H.100 cable. Replug the cable and make sure that all connectors are seated correctly. Replace the cable with a known good T1 or E1 cable. If the problem persists, contact Blueworx Support for assistance.

Severity

Red

Destination

Log, System Monitor, Alertable