17978

SCBus problem cleared by telephony adapter embedded software

The embedded software on the adapter card continually monitors the status of the SCBus. A problem was previously detected, and reported with error code 17977. The problem has now cleared. The adapter was writing data to the SCBus. It read back the data, and compared what was read-back against what was written, to detect corruptions. Such corruptions were detected. Error 17977 is generated when the first SCBus problem is detected. The same check is made every 20ms. The problem has now cleared. Possible causes of the problem are: - SCBus cable - Hardware in the adapter that detected this problem - Hardware of other SCBus-connected devices - Incorrect configuration of other SCBus-connected devices During the period between the error being first reported, and when the error clears, voice data transmitted by this DTTA over the SCBus may be corrupted.

Check that all devices on the SCBus are configured correctly. Try re-starting the system to check if the problem recurs. Run diagnostics on the card that reported the problem. Run diagnostics on all other SCBus-connected devices. If the problem persists, contact Blueworx Support for assistance.

Severity

Green

Destination

Log, System Monitor, Alertable