Installing the Blueworx Voice Response VoIP software

You can install the VoIP software fileset at the same time as you install Blueworx Voice Response or later. For more information on how to install Blueworx Voice Response, see Blueworx Voice Response for AIX: Installation.

Procedure

Log on to AIX as root, if you are not logged on already.

To check if the Blueworx Voice Response VoIP software is already installed, type the following command and press Enter:

lslpp -l 'dirTalk.VOIP_SIP'

An output similar to the following (showing a Level of 6.1.0.0 or higher) should be displayed:

  Fileset                     Level     State      Description
  ------------------------------------------------------------------------
Path: /usr/lib/objrepos
  dirTalk.VOIP_SIP           6.1.0.0  COMMITTED  Voice Response VOIP feature
                                                                      for SIP

This means that the VoIP software is already installed and you can skip the rest of this procedure.

To mount the CD containing the device drivers, type the following command and press Enter:
```
smitty mountfs
```
Press F4 in the FILE SYSTEM name entry field to display a list of file systems.
Select the CD-ROM file system (for example /dev/cd0).
Press Enter.
The system mounts the CD. Review the output when it has finished.
Press F10 to exit from SMIT.
Use the cd command to move to the file location of your install directory (if you are not already in the correct directory).
Type smitty install_latest, then press Enter.
In the INPUT device/directory for software field, type . (period) for the current directory.
In the SOFTWARE to install field, press F4 to list the filesets in this directory.
Select the dirTalk.VOIP_SIP fileset by pressing F7, then pressing Enter.
The system installs the software.
Review the output.
Press F10 to exit from the install menu.
To activate the new software, shut down and restart AIX, by typing the shutdown -Fr and pressing Enter.