ISDN Layer 1 initialization parameter error
A parameter was set incorrectly when initializing ISDN Layer 1 with parameters from the Trunk Interface section in the System Configuration menu option. For ISDN on E1 the CCS signalling timeslot must be 16; for T1 it must be 24.
Checking individual parameters can only be done using the 'field' access at the logon panel on Blueworx Voice Response. If System Configuration was used to configure the pack, check that the correct ISDN template was copied to the trunk group used for the pack, for example, E1 or T1. If Pack Configuration was used to configure the pack, check that the pack is set up for ISDN and that the configuration was saved. Try to re-enable the trunk on which the error occurred. If this does not solve the problem shut down and restart Blueworx Voice Response. If this does not solve the problem then shut down and restart the pSeries system unit. If none of the above is successful call Blueworx Support.
Red
Log, System Monitor