Installing MRCP for State Tables

To install MRCP for State Tables:

  1. If you have not already used the vae.setuser utility, or you have installed Blueworx Voice Response software since it was last used, you must run it before using the vaeinit command. Refer to the section “Setting the dtuser file permissions” in Blueworx Voice Response for AIX: Installation for instructions.
  2. Log on to the AIX user account that is set up for Blueworx Voice Response (normally dtuser). This should start the initialization sequence and display the Blueworx Voice Response User Login menu:
            Blueworx Voice Response User Login
    1) Start Blueworx Voice Response Processes
    2) Do Not Start Blueworx Voice Response 
    Enter choice (or <ENTER> for option list)

    If the User Login menu is not displayed, type vaeinit and press Enter.

  3. Type 1 and press Enter.

    The system prompts you for your display name.

  4. Type your machine's IP address followed by :0
  5. When the system displays the Logon window, log in to Blueworx Voice Response as admin.
    1. If you already use MRCP for VoiceXML applications, check if any of the MST, MRCP or MRCP_Log custom servers are running. If so, use the Custom Server Manager to stop them.
    2. From a shell window type the following commands:
      cd $VAE/sw/samples/MST/
      MST_Import -i MST.tar.Z
      
      For more information, refer to the $VAE/sw/samples/MST/readme.txt file.
  6. Check that no errors were generated. If there were no errors, you have just successfully installed the following custom servers:
    • MST
    • MRCP
    • MRCP_Log