Changing a device definition

Use this procedure if you need to change any of the device definitions.

Start

1. From the Welcome window, select Configuration —> System Configuration —> Change
2. Changing the port for an exchange data link: Click Exchange Data Link.

   The system displays the parameters in the Exchange Data Link parameter group.

3. Click EDL Communication Port.
4. Click Help for guidance on how to set this parameter according to the type of exchange data link you intend to use.
5. When you have typed in the correct value, click OK.
6. Close the Exchange Data Link window, by clicking File —> Close.
7. Click File —>Save. If you aren't defining anything else, go to step 20.
8. Changing the other device definitions: Click General.

   The system displays the parameters in the General parameter group:

9. Defining the diskette drive: To redefine the diskette drive, click Default Diskette Drive.
10. Type in the new device definition for the diskette drive.
11. Click OK.
12. Defining the tape drive : To redefine the tape drive, click Default Tape Drive.
13. Type in the new device definition for the tape drive.
14. Click OK.
15. Defining the printer : To redefine the printer, click Printer Queue.
16. Type in the identification for the print queue.
17. Click OK.
18. Close the Blueworx Voice Response window, by clicking File —> Close.
19. Click File —> Save.
20. Close the System Configuration window, by clicking File —> Close.

    The next time you restart Blueworx Voice Response, the system configuration will include the new devices.