The SSTransfer custom server has some command line parameters that you can set to help you debug problems, or to fine-tune the operation of the custom server.
The parameters are defined in Table 1. For information on how to set the parameters, see Setting configuration options.
|
Parameter |
Default setting |
Description |
|---|---|---|
|
-d |
off |
Provide extra debugging information (in addition to the information that always gets sent). Valid values are 0 (none) to 4 (everything). To set the logging level to 3, specify –d3 . |
|
-f |
DTstatus.out |
A fully qualified file name where trace output is to be written, for example -f/home/dtuser/sstransfer.log. The SSTransfer custom server will continue to write some critical information to DTstatus.out. |
To set one or more of the configuration options, follow the procedure below:
The system displays the Custom Server (SSTransfer) window.
The system displays the Properties (SSTransfer) window.
The system closes the Properties (SSTransfer) window.
The system displays the available custom servers in a window.
The Run Status button should display None, after a short while.
After a short while the Run Status button should display Waiting. The new command line parameters are now in effect. If the Run Status remains at None, there is probably an error with one of the command line parameters. Check the error log for details.