Changes to system parameters do not take effect immediately. Table 1 tells you what to do to make the parameters in each group take effect.
To shut down Blueworx Voice Response, click Operations —> Immediate Shutdown or Operations —> Quiesce Shutdown.
To disable then enable the appropriate trunk, click Operations —> System Monitor, then click the required trunk and choose the appropriate command from the menu. For more information about shutting down Blueworx Voice Response and using the System Monitor, see the Blueworx Voice Response for AIX: Managing and Monitoring the System information.
| Parameter group |
To make new parameter values take effect... |
|---|---|
| Application Server Interface |
Restart Blueworx Voice Response. |
| Call Progress Tones |
Disable then re-enable the packs. |
| Channel |
Disable then re-enable the packs to which the channels are connected. |
| Channel Group |
Disable then re-enable the packs to which the channels in the channel group are connected. |
| CPU Monitor |
Restart Blueworx Voice Response. |
| General |
Restart Blueworx Voice Response. |
| Exchange Data Link |
Restart Blueworx Voice Response. |
| ISDN Signaling |
Stop the ISDN signaling process and disable all ISDN trunks, then restart the signaling process and re-enable the trunks. |
| Key Signals |
Restart Blueworx Voice Response. |
| Signaling Type |
Disable then re-enable the packs to which channels that use the signaling group are attached. |
| Trunk Interface |
Disable then re-enable the pack. |