General
Field
Disabled
Enabled
Enabled
Specifies whether the DTTA is to be automatically re-enabled after an irrecoverable error. Normally, you should leave this parameter set to Enabled to ensure maximum availability of trunks on a production system. However, to help with some types of problem diagnosis, IBM Service might ask you to set this parameter to Disabled. When the parameter is set to Disabled, you must use the System Monitor or the ASCII console to re-enable the pack after a hardware failure.
The maximum number of times the DTTA is re-enabled in a one hour period is specified by the Maximum Retries for Pack/DTTA Reenabling parameter.